Torque Meter for GT03 School-Design


New

Torque Meter for GT03 School-Design

In stock

$144.48
Price incl. VAT, plus Shipping
Delivery weight: 0.5 kg


Torque meter for Stirling Engine GT03 (School-Design)

The friction drum of the friction body (Prony brake with inclination weight) is fastened to the crank shaft of the Stirling motor in front of the flywheel using the Allen key. The friction between the friction drum and the friction body can be changed with the adjustment screw on the friction body.

When the Stirling motor runs, the friction body with pointer is carefully pushed onto the friction drum. The friction should then be slowly increased; it should not be so high that motor comes to rest. The set torque is indicated on the scale.

Supplied items:
- Friction drum: D = 12 mm
- Pointer with friction body
- Scale with bracket
- Allen key
1,5 mm (
to fasten the friction drum to the crank shaft)

Technical Data:

Measurement range: 25·10-3 Nm
Resolution: 1·10-3 Nm
Weight for balance: 50 g

Torque meter in operation:

 

 

                     

Prony Brake

The Prony Brake is a simple device invented by Gaspard de Prony to measure the torque produced by an engine. The term "brake horsepower"  is one measurement of power derived from this method of measuring torque. (Power is calculated by multiplying torque by rotational speed).

Essentially the measurement is made by wrapping a cord or belt around the output shaft of the engine and measuring the force transferred to the belt through friction. The friction is increased by tightening the belt until the frequency of rotation of the shaft is reduced. In practice more engine power can then be applied until the limit of the engine is reached.

In its simplest form an engine is connected to a rotating drum by means of an output shaft. A friction band is wrapped around half the drum's circumference and each end attached to a separate spring balance. A substantial pre-load is then applied to the ends of the band, so that each spring balance has an initial and identical reading. When the engine is running, the frictional force between the drum and the band will increase the force reading on one balance and decrease it on the other. The difference between the two readings multiplied by the radius of the driven drum is equal to the torque. If the engine speed is measured with a tachometer,  the brake horsepower is easily calculated.

An alternate mechanism is to clamp a lever to the shaft and measure using a single balance. The torque is then related to the lever length, shaft diameter and measured force.

The device is generally used over a range of engine speeds to obtain power and torque curves for the engine, since there is a non-linear relationship between torque and engine speed for most engine types.

Power output in Sl units may be calculated as follows:

Rotary power (in newton-meters per second, N·m/s) = 2π × the distance from the center-line of the drum (the friction device) to the point of measurement (in meters, m) × rotational speed (in revolutions per second) × measured force (in newtons, N).

Or in English units:

Rotary power (in pound-feet per second, lbf·ft/s) = 2π × distance from center-line of the drum (the friction device) to the point of measurement (in feet, ft) × rotational speed (in revolutions per second) × measured force (in pounds, lbf).

 

Accessories

Product Note Status Price
Stirling Motor GT03 School Design Stirling Motor GT03 School Design
$449.74 *
Delivery weight: 2 kg
Set of Parts - Stirling Motor GT03 - School-Design Set of Parts - Stirling Motor GT03 - School-Design
$237.30 *
Delivery weight: 3 kg
*
Prices incl. VAT, plus Shipping
Display accessory details

We also recommend

Stirling Motor GT03 School Design
$449.74 *
Delivery weight: 2 kg
*
Prices incl. VAT, plus Shipping

Browse this category: Stirling Engine - Accessories